| ITEM NAME |
: |
TRAFFIC LIGHT CONTROLLER INTERFACING CARD |
| MODEL NO. |
: |
VMC-TLC |
- The Traffic Light Controller Card has RED, YELLOW & GREEN LED's to demonstrate the use of Microprocessor in controlling the traffic movement under the control of program.
- It is a good example of use of Microprocessor in common applications.
- Compatible with 8085/8086 Micrprocessors and 8051/31/89c51 Microcontrollers
- Assembled in an ABS plastic cabinet with cover for protection.
- User’s Manual & RS232C cable.
|
| ITEM NAME |
: |
ADC INTERFACING CARDS |
| MODEL NO. |
: |
VMC-ADC |
- Uses 8 bit ADC-0809 monolithic CMOS device with in-built 8 channel multiplexer.
- 8 LED's are provided to display the digital value of the input analog signal (optional).
- The complete operation of A/D converter chip can be understood using this card..
- Compatible with 8085/8086 Micrprocessors and 8051/31/89c51 Microcontrollers
- Assembled in an ABS plastic cabinet with cover for protection.
- User’s Manual & RS232C cable.
|
| ITEM NAME |
: |
DAC INTERFACING CARDS |
| MODEL NO. |
: |
VMC-DAC |
- Consists of two independent 8 bit digital to analog converter alongwith a stable regulated voltage source using 723 regulator.
- The current output of DAC are converted to voltage using operational amplifiers.
- Compatible with 8085/8086 Micrprocessors and 8051/31/89c51 Microcontrollers
- Assembled in an ABS plastic cabinet with cover for protection.
- User’s Manual & RS232C cable.
|
| ITEM NAME |
: |
LOGIC CONTROLLER INTERFACING CARD |
| MODEL NO. |
: |
VMC-LC |
- The logic controller interface provides the user 8 TTL buffered outputs & inputs.
- The logic state of each input & output is indicated by LED.
- This module can be effectively used to teach 8255 in input & output modes.
- It can also simulate ladder networks.
- Compatible with 8085/8086 Micrprocessors and 8051/31/89c51 Microcontrollers
- Assembled in an ABS plastic cabinet with cover for protection.
- User’s Manual & RS232C cable.
|
| ITEM NAME |
: |
STEPPER MOTOR CONTROLLER INTERFACING CARD |
| MODEL NO. |
: |
VMC-SMC |
- This module can control Stepper Motor in three parameters such as direction, speed & number of steps.
- It has got driver transistors for driving all the phases of the motor.
- The interface is useful for robotics & control applications.
- Compatible with 8085/8086 Micrprocessors and 8051/31/89c51 Microcontrollers
- Assembled in an ABS plastic cabinet with cover for protection.
- User’s Manual & RS232C cable.
|